Skip to main content

VANDY VAPE TRIDENT 100W KIT

Details of VANDY VAPE TRIDENT 100W KIT by djvape. Source: [djvape]
Instructions:
​Vandy Vape Trident Kit comprises of a Trident Mod and a Trident Tank. The mod is constructed with a Silica gel finish that is IP67 waterproof and also offers shock and dust protection. So, you are free of worry for accidentally dropping it or using it in the rain. Powered by a single 18650 battery, it's capable of a maximum output around 100W. You may monitor the charge level of the battery via the three-colour LED indicator lights integrated on the fire button. A purple light means the battery level is above 70%, blue means 30-70% while red means below 30%. As for the tank, it features a maximum e-juice capacity of 5ml and an easy top-fill structure. Paring with the tank is a replaceable Mesh 80 coil head. This head fires with a 0.15ohm resistance and has an output range of 50-90W. Airflow reaches the coil head via two air slots located at the bottom. These slots are fully adjustable to ensure you can find your favourite setting. Anyway, the Trident is worth a shot. Just hold it in hand to conquer the sea!
Parameter:
  • POM drip tip
  • 3.5/5ml juice capacity
  • Glass tank
  • Integrated mesh replacement coil:
    • Resistance: 0.15ohm
    • Best adapted power: 50-90W
  • Easy operation, simple refilling
  • 510 threading connection
  • 26mm overall diameter
Trident mod features:
  • Output power: < 100W
  • Working voltage: 3.2-4.2V
  • Working current: < 35A
  • Output voltage: 2.8-4.0V
  • Coil resistance range: 0.1-3ohm
  • Output mode: Bypass
  • Standby current: ≤ 10μA
  • Waterproof: silica gel material, IP67 waterproof, extreme water, shock and dust protection. Free of worry for rains or dropping by accident.
  • Intelligent LED display to show you the clear battery power: the Trident Kit has an LED display that shows you the exact battery power condition. When you start vaping, the current light is getting brighter; the MOS tube controls output; the non-smoking LED is gradually extinguished when you stop vaping, and the MOS stops outputting. The three indicator colours on the switch button represent the various battery capacity. Below battery capacity indicators for guidance:
    • Purple light: ≥ 70% battery capacity
    • Blue light: 30%-70% battery capacity
    • Red light: ≤ 30% battery capacity
    • Besides, the red light will flash 5 times once the voltage is lower than 2.8V
  • Equipped with PCB board
  • Multiple protections are provided to avoid potential risks:
    • Over-heating protection
    • Short circuit protection
    • Battery management system
    • 10 seconds cut-off
  • Spring-loaded firing button
  • Houses single 18650 battery (battery sold separately)
  • Micro-USB charging port
Package Includes:
1 x Trident Mod
1 x Trident Sub Ohm Tank
1 x Accessory bag
1 x User manual
1 x 5ml Bubble glass
1 x 0.15ohm Mesh Coil
Labels:

Comments

Post a Comment

Popular posts from this blog

JOYETECH RFC RIFTCORE DUO RTA TANK

Detail of JOYETECH RFC RIFTCORE DUO RTA TANK by DJVAPE. Source: [ DJVAPE ] Instructions: Joyetech RFC Riftcore Duo   RTA  is an innovative coiless atomizer that uses dual RFC heating elements for perfect atomization. Looks like two rectangle sheets with holes, RFC heating elements efficiently heat e-juice to bring you original flavour and dense clouds to the largest extent. RFC Riftcore Duo RTA has striking performance in terms of usability and life span because it could offer 1,000,000 puffs for you! And with self-cleaning function, it maintains purer flavour and gives you simple vaping! Parameter: Diameter: 26.0mm Height: 47mm Capacity: 3.5ml Thread: 510 thread Heater: Applicable with Joyetech RFC heater only Package Includes: 1 x Joyetech RFC Duo  Atomizer  1 x Cotton Pack 1 x Hex Wrench 1 x Manual 1 x Warranty Cards 1 x Warning Card Spare Parts Visit: JOYETECH NOTCHCORE TANK ATOMIZER 2.5ML
Post a Comment
Read more

UWELL CROWN 4 / IV SUB OHM TANK

Details of UWELL CROWN 4 / IV SUB OHM TANK by DJVAPE. Source: [ djvape ] Instructions: As we knew, crown series always the star of Uwell.  Now Uwell is introducing a new member of Crown family- Crown 4 tank . Crown 4 tank comes with stainless steel construction, which makes it durable and gorgeous. The tank adopts a bubble pyrex glass tube to hold a 6ml large capacity of e-juice. With advanced patented self-cleaning technology, the tank can absorb the e-juice in the condensation holder through regular usage and vaporize it. Crown 4 tank UK utilizes Dual SS904L coil and double helix mesh coil to achieve heating evenly and produce excellent flavour. The tank features top filling design and bottom adjustable airflow system, you could enjoy easier filling method and smooth airflow. Parameter: Size: 28*54.8mm Material: Stainless Steel, Glass & Silicone Coil type: Dual SS904L Coil 0.2ohm (70-80W) Dual SS904L Coil 0.4ohm (60-70W) SS304 UN1 Coil 0.25ohm (55-65W) FeCrAl ...
Post a Comment
Read more

VOOPOO DRAG 157W TC BOX MOD GOLD EDITION

Details of VOOPOO DRAG 157W TC BOX MOD GOLD EDITION by DJVAPE. Source: [ DJVAPE ] Instructions: The VooPoo DRAG 157W TC Box Mod with Gene Chip inside is a dual 18650 (sold separately) powered mod compatible with the VooPoo PC App for full customization and  fine-tuning  settings. The Gene Chip inside the DRAG offers a full temperature control suite with 157W max power and  firing  speed of 0.025 seconds! The VooPoo DRAG is a highly efficient variable wattage box mod with a chip efficiency rating of 95% for accurate and reliable power output. The chassis of the DRAG made from zinc alloy and has a carbon fibre accent panel on one side and the word DRAG lightly etched into the battery access door. The DRAG is compatible with the VooPoo PC App which allows the user to customize settings and add a customized logo to the display. The VooPoo DRAG 157W TC Box Mod UK is ideal for users looking for some serious power output with minimal fire de...
Post a Comment
Read more